Our World of Hydraulics
 
Our World of Pneumatics
  You are here : Home > Products > Our World of Hydraulics > Tube & Pipe Clamps  
 

Tube & Pipe Clamps

 
     
 
Tube & Pipe Clamps
 
     
 
A pipe and a tube are both, by definition, hollow cylinders used to pass liquids through them. Both are created to be rigid and permanent contributions from an engineering standpoint.
 
     
 
Pipe Tube
A hollow cylindrical piece identified by NB (Nominal Bore) A hollow cylindrical piece identified by outside Diameter
Thickness of Pipe is defined by mentioning the ID in terms sch i.e 10,80,160 etc Thickness of a tube  is define  by the gauge 16 gauge,18 gauge,20 gauge
Lower sch. no. – wall thickness is lower. Lesser the gauge no. – wall thickness is more. Higher sch. no. – wall thickness is higher. More the gauge no. – wall thickness is less.
Pipe is fabricated for most of sizes and drawn for lower sizes. Tubing is always drawn and never fabricated..
A tube can be circular, square, oval, rectangular, etc. A tube can be circular, square, oval, rectangular, etc.
 
     
  Tube Couplings  
     
 
  • One way check valve coupling - These are used originally for connecting portable air tools and equipments to compressed air lines. However, now they are used on many other applications. These couplings are usually built to withstand operating pressure upto 300 PSI. Where non compressible fluids such as water, oil and grease are being used, this pressure may sometimes be exceeded safely. The coupler body should be installed on the upstream (Supply) end of the line to shut off the fluid supply, when coupling is disconnected. The Adaptor has no valving and upon disconnection, exhaust, upon downstream media. Size – ¼” to 3”

  • Two way check valve coupling - These are designed for connecting hydraulic lines. They are also extensively used where a variety of other fluids are involved. They are made to withstand pressure from 800 to 10000 PSI depending upon size and material. They contain valves in both the coupler and adaptor to prevent loss of fluid when the parts are disconnected. Size – ¼” to 2”

  • Straight Through Couplings - These are designed without valves to provide the least resistance to fluid flow. Therefore, they require manual check valves in both lines if fluid loss is to be prevented when the couplings are disconnected. Straight thru couplings provide for fast simple connection to any type of system. Coupler bodies of this design are manufactured in brass, steel, stainless steel. The wide range of sizes from 1/8" to 3" allows the employment in fields ranging from instrumentation to steel mills. Size – ¼” to 3”

  • Tube Couplings - To connect pressure or vacuum lines to plain tubes & pipes. The coupling is simply pushed over the end of the tube & pressed firmly to the stop position. This provides an effective leak-proof sealing. The tube can be disconnected merely by pressing down the lever & pulling off the coupling. No welding, threading or flaring of tubes. Size – ¼” to 1 1/4” (4mm to 32mm)
 
 
Home | About Us | Downloads | Industries We Serve | Blog | Sitemap | Enquiry | Contact Us
 
Web design and seo Mumbai : PEXATEK